DJI Zenmuse L1

£9,667.00 (+VAT)

Zenmuse L1 – Instant Clarity & Superior Accuracy

What stands out

    • Integrates a Lidar module, RGB camera and high-accuracy IMU
    • Detection Range: 450m (80% reflectivity, 0 klx) / 190 m (10% reflectivity, 100 klx)
    • Point rate: 240,000 points per second
    • Supports 3 Returns [3]
    • High efficiency – 2 km² covered in a single flight
    • 20MP RGB camera
    • 1-inch CMOS
    • Mechanical Shutter

A Lidar + RGB Solution for Aerial Surveying

The Zenmuse L1 integrates a Livox Lidar module, a high-accuracy IMU, and a camera with a 1-inch CMOS on a 3-axis stabilized gimbal. When used with DJI Matrice 300 RTK and DJI Terra, the L1 forms a complete solution that gives you real-time 3D data throughout the day, efficiently capturing the details of complex structures and delivering highly accurate reconstructed models.


Exceptional Efficiency

Generate true-colour point cloud models in real-time, or acquire 2 km² of point cloud data in a single flight [1] using the Livox frame Lidar module with a 70° FOV and a visible light camera with a 1-inch sensor.


Unparalleled Accuracy

Render centimetre-accurate reconstructions thanks to the high-accuracy IMU, a vision sensor for positioning accuracy, and the incorporation of GNSS data.


Ready When You Are

The IP44 rating allows the L1 to be operated in rainy or foggy environments. The Lidar module’s active scanning method enables you to fly at night.


Visualize Data as You Fly – Livox Lidar Module

  • Frame Lidar with up to 100% effective point cloud results
  • Detection Range: 450m (80% reflectivity, 0 klx) / 190 m (10% reflectivity, 100 klx)
  • Effective Point Rate: 240,000 pts/s
  • Supports 3 Returns [3]
  • Line Scan Mode and Non-repetitive Scan Mode

Everything in View – RGB Camera

  • 20MP
  • 1-inch CMOS
  • Mechanical Shutter

Accurate Details at Your Disposal – High-accuracy IMU

  • Accuracy: 0.025° (roll/pitch) / 0.08° (yaw)
  • Vision Sensor for Positioning Accuracy
  • GNSS, IMU, RGB Data Fusion

Recreate the World in 3D Point Clouds

Point Cloud Live View

Real-time point clouds provide immediate insights onsite, so operators are informed to make critical decisions quickly. You can also verify fieldwork quality by checking point cloud data immediately after each flight.


Measurement and Annotation

Acquire and communicate critical dimensions on the point cloud model using measurements and annotations.


One-stop Post-processing

DJI Terra fuses the IMU and GNSS data for point cloud and visible light calculations, in addition to conducting POS data calculations so you can effortlessly generate reconstructed models and accuracy reports.


Application Scenarios

  • Topographic Mapping
  • Emergency Response
  • Energy & Infrastructure
  • Law Enforcement

[1] Over 30 minutes, at a speed of 10m/s, a flight altitude of 100 m, with a side overlap rate of 20%, point cloud density > 200 points/m².

[2] Flight altitude: 50 m

[3] In operations with two or three returns, the point rate is 480,000 pts/s


 

 

 

Reviews

There are no reviews yet.